to our newsletter
You may want to consider investing in the ATLAS SOUND MS20E Heavy Duty Microphone Stand. And as for the room it’s not treated much. Rode NT1a vs NT2a; Which one is right for You? However, the Rode NT2a Provides a Cardioid-, Figure-8- and Omnidirectional polar patterns, as well as a High-Pass Filter and a PAD, whereas the NT1a only features a Cardioid Polar Pattern, no High-Pass Filter nor PAD. A really versatile mic that is at it’s best with vocals. Like all condenser microphones, it’s very sensitive, and picks up a lot. A choice of 3 different polar patterns, bass roll off response setting, and a choice of pads. Well look no further as I take an in depth look at these two microphones! bit darker, then check out the Rode NT1. Well that’s about it for today my friend! Basically, the Rode NT1 has a much flatter sound than the NT1-A because of the flatter frequency response. on their website, you will get a 10-year warranty… yes, 10 years! the best microphone to be ever created and they even compare it to other ones horrible and shrill. I want a microphone for vocal recording plz suggest which one is Best??? It’s very true in recreating what it hears, with an even sound representation. Make sure your mic stand can hold it properly. Others claim that the high end is harsh, sibilant, and much too bright. It also does well with a wide variety of instruments, and has a lot of features not found in other mics. -Stu, Great review. Have you ever wondered what the main differences are between the Rode NT1A vs. NT2A? iFi Aurora Review – Love At First Sight?! you want a microphone which has an identical build quality but which sounds a As far as sound quality goes, both microphones sound My recommendation of the SM7B still stands, with the Electrovoice RE20 and Heil PR40 coming in second and third respectively. to achieve a certain effect, then great! In the Nt1 description it lists acoustic guitar as it’s strong point, but is not listed in the Nt2 “pros”. One of the biggest complaints about this mic is it’s harshness and sibilance in the treble range. This could pose a problem if you plan to use a different shock-mount or upgrade in the future. It is really well regarded, but does have some flaws that had to be addressed. Before we get started, grab a snack, sit back and relax because.. Now without further ado, let’s get rolling! No problem man glad to help. expensive and doesn’t really sound “better”, it makes up for that increase in I understand you have a soft voice. specific taste, since every microphone will have its own character. Let me know what you decide!! It can start to sound tinny and thin with big voices, coming out rather sterile. The reason why the Rode NT1a is so The shock mount is metal, when most included ones are Rode NT1A … means that it will be actually quite bright sounding, which is what I referred Both are pretty versatile however. Am I making a right choice? is also something that works well with acoustic guitars, since that high-end it’s built to last. Many folks claim it’s too bright and tinny. The included XLR cable is poor, and may give you connection problems. Some people might find that it Some reviewers claim the mic sounds cheap without a lot of EQ. with a three position variable high-pass filter (Flat, 40Hz or 80Hz), In his spare time, he likes to fish, paint, play guitar, pray, rap, make beats, take photos, record videos, graphic design, and more. Don’t hesitate to contact me if you need any advice. In some cases, you can take advantage of these polar patterns Let me know if you ever need help with anything! Thank you so much Mark! has one of the best Warranty systems in existence; If you register your product Audio interface, Studio Monitors, XLR cable, etc. Technical Specs Multiple Polar Pattern Rode NT1A only has a single polar pattern, which is cardioid. The NT2a still has a slight boost to the higher frequencies, Do you have any sort of room treatment employed? Pop-filter. The Rode Nt2a provides three polar patterns; Cardioid, Bi-directional, Omnidirectional, whereas the NT1a only provides one; Cardioid. I’ve read a lot of reviews on the NT2A, and have seen it endorsed for all of the following: Being that this is a studio bundle, the only thing I would recommend is to purchase a good and durable mic stand. What this means is that even though the NT2a is much more The high end is a bit tinny and too bright for some peoples tastes. I’ve been using the NT one for a while, and really like it for the piano. What You Need to Know About Microphone Polar Patterns. that are in a much higher price range. I am a beginner in sound production, and starting up a home studio specifically for recording vocals and some guitar. filter already attached. I have some acoustic foam fixed perpendicularly in the corner of the room where I want to record my vocals. Some say that the positive accolades for “quietest mic” are a bit of a misnomer. Full Disclosure: As an Amazon Associate, I earn from qualifying purchases. be as useful since we normally just used the cardioid one. Find out about Bit depth vs. sample rate, and specifically how your interface and computer communicate with one another to create the sounds you hear! It doesn’t feature as much of a high-end boost, which is what gives the NT1-A its distinct characteristic. Let me know what you’re thinking about this and what your budget is. I mentioned earlier, it all depends on your personal taste. at times depending on the source. Polar Pattern: Cardioid, Bi-Directional, as well as tell you their differences, and lastly which one I think you should Both can be purchased with that sweet 10 year warranty through Rode’s website. There’s so many options and people have luck with an array of mics. enhances their voice, while others may find that it makes their voice sound just like the NT1a does, which is part of the reason why they sound so similar. Great post! What are studio monitors? You may have to turn up the volume on your pre-amp to get optimal sound. Note: Even though some people complain about the This mic seems to get either glowing reviews, or people really complain about it. One thing to know, don’t even think about recording with this mic using your standard computer speakers. Like I just mentioned, multi-pattern microphones tend not to ways of recording. Will be your workhorse mic. His sense of humour, coupled with a knack for excellence and strict attention to detail are what allow him to stand out in an crowded industry. Be aware that. Have you ever wondered what the differences between the Rode The NT1A by contrast doesn’t have any. If you absolutely know that you are going to be using the can EQ down a bit rather than having it sound undefined and trying to fix it/boost Both are similar in color and appearance. boost a bit since it gives it a more “airy” sound, which I always liked. Some say it’s the warmest, most even sounding mic you can buy in this price range. NT2a’s polar patterns to do some mid-side recording, or industry and you can find them in almost any music studio.